KreteBond Concrete Crack Filler 1/2-Gal Kit

Status: In Stock, ready to ship

For proper adhesion and performance, new concrete must be cured a minimum of 28 days prior to repair. Concrete hairline cracks should be routed using a minimum 1/8" straight diamond blade and cut approximately 1/2" deep to open the crack for proper filling. Remove all loose concrete, dust, debris, and foreign material before application by thoroughly brushing and vacuuming the repair area and surrounding surface. For larger cracks or extensive concrete damage, consult a WiseBond Floors representative before proceeding with repairs.

KreteBond delivers a professional-grade concrete repair solution that restores surface integrity before installing your epoxy multicolor chip floor coating system. Its high-strength epoxy formulation, rapid cure time, and excellent bonding characteristics make it an essential step for achieving long-term durability, proper coating adhesion, and a smooth, uniform substrate. When used as part of the WiseBond Floors system, KreteBond helps create the solid, properly prepared surface required for high-performance epoxy and polyaspartic floor coatings, ensuring your finished floor performs exactly as designed.

Shop Tools Shop Single Products Shop Flake 25 lb. Boxes

$30.05

KreteBond Concrete Crack Filler 1/2-gallon kit is a two-component, modified epoxy concrete crack repair compound designed for patching concrete cracks, spalled areas, and small holes (under 1 inch) after proper concrete surface cleaning has been completed. Formulated specifically for minor concrete repairs, surface imperfections, and hairline cracks, KreteBond provides high-strength bonding, excellent physical properties, and strong load-bearing performance. These characteristics make it the ideal product for filling and patching concrete surfaces prior to the installation of WiseBond Floors epoxy systems. KreteBond is specially formulated for fast repairs, drying in approximately 60 minutes to allow coating projects to move forward quickly. Note that repairs to active or structural cracks cannot be guaranteed, as movement in the concrete may continue after repair.

FEATURES:

• Essentially odorless
• VOC Free
• Chemically Resistant
• Non-slumping
• Mild flexibility
• Fast curing
• Easy application 1 to 1 mix ratio

We do not offer samples of our products. Why not?

FEATURES:

• Essentially odorless
• VOC Free
• Chemically Resistant
• Non-slumping
• Mild flexibility
• Fast curing
• Easy application 1 to 1 mix ratio

Shop Tools Shop Single Products Shop Flake 25 lb. Boxes

DETAILS
USAGE & NOTES
REVIEWS

HOW TO MIX: KreteBond Concrete Crack Filler

1:1 Mix Ratio:

The ratio of KreteBond is 1 Part-A to 1 Part-B. Using separate scooping devices, measure equal amounts from container A and container B and place material on a mixing board. Once on mixing board, mix both components with a 6” putty knife until a uni¬form color has been reached. Mix for 1-2 mins. Do not mix more material than can be applied in 10 minutes.

HOW TO APPLY? KreteBond Concrete Crack Filler

Apply when surface and ambient temperatures range between 55 F and 95 F and will remain that way for 24 hours.

APPLICATION:

Apply KreteBond into the crack with a 6” putty knife, making sure to completely fill. Push material as far into the crack as possible. Feather the KreteBond at each side of the crack to reduce telegraphing through the finish product. KreteBond may require a second coat or diamond grinding at the edges after it has cured. If grinding is required, it is necessary to grind the feathered edge of the KreteBond down to bare concrete. If the grinding and feathering process is not done properly, highlights may telegraph through the new coating system.

NOTE: Proper PPE (personal protective equipment), including gloves, eye protection, and appropriate respiratory protection, must be worn at all times during the mixing and application of epoxy products.

CLEAN UP:

Unmixed product may be cleaned up with water and degreaser. Once product begins hardening isopropyl alcohol, acetone or a strong solvent like methylene chloride may be required. Once dry, product can only be removed mechanically.

SPECIFICATIONS & PROPERTIES

Pot life: 5 minutes

Working time: 8-10 minutes

Shelf life: 12 months

Thinning: Not required

Application temp: 45-95°F

Solids: 95%

Cure time: 60 minutes

Recoat Time: Sand prior to re coat

LIMITED WARRANTY

It is agreed and expressly understood that the buyer’s sole and exclusive remedy shall be limited to the replacement of defective product. This warranty is not valid unless all outstanding invoices are paid in full. There is no warranty of merchantability or fitness for a particular purpose, nor any other expressed or implied warranties.

Under no circumstances shall we be liable for incidental or consequential damages of any kind, including but not limited to improper workmanship or failure to follow product application instructions. Strict compliance with all published application instructions is required. Any deviation from, modification of, or failure to follow instructions in their entirety, including omission of any step, shall immediately void this warranty in full.

We cannot warranty failure of a coating caused by moisture vapor transmission, hydrostatic pressure, out-gassing, extreme abuse, fire, explosion, improper mixing, use of expired materials, or the addition of any unauthorized chemicals. The use of any third-party or unapproved products, additives, or systems will void this warranty.

This warranty is also null and void if materials or systems are installed over a substandard or improperly prepared substrate, in violation of local building codes, or where failure is caused by substructure issues, building movement or settling, acts of God, or other environmental conditions beyond our control.

All claims must be submitted in writing by the installer and received within one (1) year from the date of purchase.

WARNING! SLIP AND FALL PRECAUTIONS

OSHA and the American Disabilities Act (ADA) have now set enforceable standards for slip resistance on pedestrian surfaces. The current coefficient of friction required by ADA is .6 on level surfaces and .8 on ramps. It is recommended that the use of angular slip-resistant aggregate in all coatings or flooring systems that may be exposed to wet, oily or greasy conditions. It is the contractor and end users’ responsibility to provide a flooring system that meets current safety standards. WideBond® or its sales agents will not be responsible for injury incurred in a slip and fall accident.

Handling & PPE Precautions

Use only with adequate ventilation. Appropriate cartridge-type respirator must be used during application in confined areas. Avoid contact with skin. Some individuals may be allergic to epoxy resin. Protective gloves and clothing are recommended.